Scanner Release Notes

All notable changes to the GIQ Scanner app. Newest first. Versions before 1.1.0 predate this changelog.

[1.4.2] - 2026-09-01

The Variety, Vendor and Weighed By / Checked By lists on Receive Inventory now show every entry. Sites with more than 20 varieties, 100 vendors or 200 users previously saw a shortened list, so searching for a later entry found nothing on the scanner even though the desktop app listed it.
Receiving a packaged product now lists the SKUs for the chosen variety and unit, matching desktop. The SKU list on the scanner was previously always empty.
The processor list on Send Processor, the pest type list on Add Insects and the waste type and reason lists on Queue Destruction now load every entry. Sites with more than 100 processors or more than 20 pest or waste types previously saw a shortened list.
The supply list on Add Pesticide, Add Insects and Log Fertigation now shows every supply class, and the batch list on Propagate Clones shows every eligible batch. Sites with more than 20 supply classes or more than 50 eligible batches previously saw a shortened list.
Propagate METRC Clones now lists varieties and pre-selects the batch's variety. The list was previously always empty.
Advance Stage stays available on a processing batch after its processed weight is recorded, however many activities follow. On busy batches the button previously disappeared once the weight record was more than 20 activities old.
Pickers that show a full list (varieties, vendors, users, supplies and similar) now load in one step, so they open faster on slow connections.

Scanning several barcodes in quick succession no longer piles up a screen per scan. Each new scan now replaces the open detail screen instead of stacking another on top; on slower devices a fast scanning run could previously freeze the app until Android closed it.
A barcode scanned while an action form is open (for example Adjust Weight) opens the item above the form instead of replacing it, so entered values and signatures are kept and the back arrow returns to the form.

Adjust Weight is now available on batches, matching the desktop feature. The action appears once a weight has been recorded in the batch's current stage, and requires a reason plus checked-by and approved-by signatures.

The print template picker now shows all label templates when printing for batches, lots, samples and destruction items, matching desktop. The type filtering introduced in 1.1.0 now applies only to user badges and location labels. As on desktop, the selected template determines how the label is rendered.

Printing several numbered labels now defaults the sequence to 1 of N through N of N, matching desktop. Previously the sequence stayed at 1 of 1 no matter how many labels were requested.
The label template, printer and scale lists now load every entry. Sites with more than 20 templates or more than 20 pieces of equipment previously saw a shortened list that could hide the destruction label, some printers and some scales.

THC and CBD concentration fields (mg/g or mg/ml) on Receive Inventory, kept in sync with the percentage fields automatically: enter either side and the other fills in.
The concentration unit follows the product type: oil and pure intermediate products show mg/ml, everything else shows mg/g, matching the web app and B300 reporting.

THC and CBD entries on Receive Inventory are now checked against valid ranges (0 to 100 percent, 0 to 1000 mg) with a clear error message, and out-of-range values can no longer be submitted.
THC and CBD entries that cannot be read as a number (for example a comma used as the decimal separator) now show the same error and block submission, instead of the potency being silently dropped from the received item.

Approve received inventory directly from the scanner. Received items now show an Approve action with its own screen, available to users with the approve received inventory permission.

Scale connections now use the TCP port configured in equipment settings instead of a fixed port.
Continuous weighing no longer drops the scale connection, and continuous mode now works across scale brands.
Removed duplicated field labels on the receive and approve inventory screens.

Electronic signature capture on scanner actions that require sign-off. The signer must verify their credentials before a signature is accepted. Covered actions: QA review, visual inspection, collect metrics, record weight, start processing, create lot, create mothers, propagate clones, send to processor, receive from processor, edit name, split batch, receive inventory, add pesticide, add insects, log fertigation, defoliate and prune, and take sample.
Dual authenticated signatures on queue for destruction.
A Reprint Label hub that lists recent items with type filters, so a label can be reprinted without re-scanning the item.
A prompt to print a label immediately after a defoliate or prune action.
Signer notification emails on create lot, matching the web app.

Source inventory links now navigate to the item from the sample, batch, and destruction views.
The print template picker is filtered by label type for destruction and sample prints, so only relevant templates appear.